MIL-PRF-5480 Data, Engineering And Technical: ReproductionThis specification covers the requirements for the production, preparation for delivery, and shipment of non-digital reproducible and nonreproducible reproductions of drawings, associated lists, and related engineering and technical data. The original documents from which these reproductions are produced may be manually or computer generated and are not addressed by this specification. For the purposes of this specification, the direct output from a digital source is considered the original from which non-digital reproductions meeting the requirements herein are produced.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

MIL-PRF-5480G

1.2.1.4 Types. Reproduced data are further designated as full size or reduced size

reproductions.

a. Type A

Full size reproductions

b. Type B

Reduced size reproductions

1.2.1.5 Media. Data reproductions are accomplished using standard materials and

processes which will provide reproductions meeting the performance requirements of this

specification.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this

specification. This section does not include documents cited in other sections of this specification

or recommended for additional information or as examples. While every effort has been made to

ensure the completeness of this list, document users are cautioned that they must meet all

specified requirements cited in sections 3 and 4 of this specification, whether or not they are

listed.

2.2 Non-Government publcations. The following document(s) form a part of this

document to the extent specified herein. Unless other wise specified, the issues of the documents

which are DOD adopted are those listed in the issue of the DoDISS cited in the solicitation.

Unless otherwise specified, the issues of documents not listed in the DoDISS are the issues of the

documents cited in the solicitation. (see 6.2)

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

ANSI Y14.1

Decimal Inch Drawing Sheet Size and Format

ASME Y14.1M

Metric Drawing Sheet Size and Format

(Application for copies should be addressed to the American Society of Mechanical

Engineers, 345 East 47th Street, New York, NY 10017-2392)

2.3 Order of preference. In the event of a conflict between the text of this document

and the references cited herein, the text of this document takes precedence. Nothing in this

document, however, supersedes applicable laws and regulations unless a specific exemption has

been obtained.

3. REQUIREMENTS

3.1 General. All drawing and data reproductions shall meet the following requirements.

Materials and processes shall be of a commercial quality suitable for the intended purpose.