MIL-PRF-5480G
3.6.2 Class 3, Type B. When reduced size reproductions are made through the use of
photographic techniques, the negatives produced shall be sufficiently accurate to permit making
full-scale reproduction material within manufacturing tolerances.
3.7 Reproduction accuracy verification.All Class 3 reproducibles shall utilize one of
the following methods to provide for reproduction accuracy verification.
3.7.1 Trammel points. Each negative or reproduced drawing section shall include a
minimum of four trammel points rectangularly located so that trammels may be applied vertically
and horizontally. Dimensions from trammel point to trammel point shall be indicated.
3.7.2 Control dimensions. Each negative or reproduced drawing section shall include
suitable control dimensions provided by means of grid lines, check points, or other identifying
information, so located that size may be checked vertically, horizontally, and diagonally.
4.VERIFICATION
4.1 Inspection. The reproductions shall be inspected for the following:
a.
Compliance with the requirements of this specification;
b.
Legibility and reproducibility;
c.
Size identification marking for reduced sizes;
d.
Reproduction accuracy for Class 3 reproductions;
e.
Method for reproductionaccuracy verification for Class 3 reproductions.
4.2 Material inspection. The packaging, packing, and marking of the reproducible and
nonreproducible material shall be inspected to verify conformance to the requirements herein.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as
specified in the contact or order (see 6.2.1). when actual packaging of materiel is to be performed
by DoD personnel, these personnel need to contact the responsible packaging activity to ascertain
requisite packaging requirements. Packaging requirements are maintained by the Inventory
Control Point's packaging activity within the Military Department or Defense Agency, or within
the Military Department's System Command. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM
products, or by contacting the responsible packaging activity.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business